Jump to content
Help us keep the site running.

Star Wars Episode III mesh and textures files .st2

Kitsuneshkaa

By Kitsuneshkaa
in 3D/2D models

 Share

Recommended Posts

  • Kitsuneshkaa changed the title to Star Wars Episode III mesh and textures files .st2
  • Engineers
shak-otay Mentor

shak-otay

Posted
  • Engineers
Posted (edited)

In the ..var01.st2 csv data is contained:

Quote

meshes\chars\common\b_human.csv b_human,,,,,,,,,,,,,,,,,,,,,,,,,

REACTION,,,,,,,,,,,,,,,,,,,,,,,,,
Level,Location,SeqCategory,Conditions,Reaction,AttackerReaction,Momentum,LengthMod,Tween,Skip,Homing,Damage,Sound,Effect,//                                          COMMENTS ,,,,,,,,,,,
,,,,,,,,0,0,0,,wep_ls_hit_low*,,//,,,,,,,,,,,
//Air Hits,,,,,,,,,,,,,,,,,,,,,,,,,
!,AIR,!,,R_Airhit_Front,,,,,,"2,1400,0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_BODY_IMPACT,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,
//Ground Hits,,,,,,,,,,,,,,,,,,,,,,,,,
!,!,knockdown,,R3_Hit_OnBack,,,,,,"0, 0, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_BODY_IMPACT,,,,,,,,,,,,
!,!,knockedfacedown,,R3_Hit_OnFront,,,,,,"0, 0, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_BODY_IMPACT,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,
//Kill Hits,,,,,,,,,,,,,,,,,,,,,,,,,
!,BACK,,ZERO_HEALTH,R4_Hit_Back,,,,,,"21,400,180",,wep_ls_hit_high,IDS_FX_LIGHTSABER_BODY_IMPACT,,,,,,,,,,,,
!,!,,ZERO_HEALTH,R4_Hit_Front,,,,,,"2,1400,0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_BODY_IMPACT,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,
"//Blocked,  ALL Directions (Note: 360 Blocking now in!!!)",,,,,,,,,,,,,,,,,,,,,,,,,
1,"BLOCK, FRONT, LEFT, RIGHT, BACK",,,Block1_React_Gen,,,,0,0,"10, 720, 0",0,,
2,"BLOCK, FRONT, LEFT, RIGHT, BACK",,,Block1_React_Gen,,,,0,0,"10, 720, 0",0,,
3,"BLOCK, FRONT, LEFT, RIGHT, BACK",,,Block1_React_Gen,,,,0,0,"10, 720, 0",0,,
4,"BLOCK, FRONT, LEFT, RIGHT, BACK",,,Block1_React_Gen,,,,0,0,"10, 720, 0",0,,
5,"BLOCK, FRONT, LEFT, RIGHT",,,R4_Hit_Front,,,,0,0,"10, 720, 0",0,,
5,"BLOCK, BACK",,,R4_Hit_Back,,,,0,0,"10, 720, 0",0,,
9,"BLOCK, FRONT, LEFT, RIGHT, BACK",,,Block1_React_Gen,,,,0,0,"10, 720, 0",0,,

,,,,,,,,,,,,,
"//Hit, in Rear",,,,,,,,,,,,,
1,BACK,,,R1_Hit_Back,,,,,,"0, 720, 0",,wep_ls_hit_low,IDS_FX_LIGHTSABER_BODY_IMPACT
2,BACK,,,R2_Hit_Back,,,,,,"0, 720, 0",,wep_ls_hit_med,IDS_FX_LIGHTSABER_IMPACT_HEAVY
3,BACK,,,R3_Hit_Back,,,,0,0,"0, 720, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_HEAVY
4,BACK,,,R4_Hit_Back,,,,0,0,"2, 720, 180",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_FURY
5,BACK,,,R4_Hit_Back,,,,0,0,"2, 720, 180",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_FURY
9,BACK,,,NULL,,,,0,0,"2, 720, 180",,wep_ls_hit_high,
,,,,,,,,,,,,,
"//Hit, Front",,,,,,,,,,,,,
1,FRONT,,,R1_Hit_Front,,,,,,"10, 720, 0",,wep_ls_hit_low,IDS_FX_LIGHTSABER_BODY_IMPACT
2,FRONT,,,R2_Hit_Front,,,,,,"10, 720, 0",,wep_ls_hit_med,IDS_FX_LIGHTSABER_IMPACT_HEAVY
3,FRONT,,,R3_Hit_Front,,,,0,0,"0, 720, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_HEAVY
4,FRONT,,,R4_Hit_Front,,,,0,0,"0, 720, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_FURY
5,FRONT,,,R4_Hit_Front,,,,0,0,"0, 720, 0",,wep_ls_hit_high,IDS_FX_LIGHTSABER_IMPACT_FURY
9,FRONT,,,NULL,,,,0,0,"0, 720, 0",,wep_ls_hit_high,
,,,,,,,,,,,,,

edit: and xml data: 

	<!--
		______________________________________________________________________________
		Copyright 2004 The Collective, Inc.

		DISMEMBERMENT DEFINITION

		Character: Clone Trooper
		Author: Baback Elmieh
		Date: 01/07/2004
		______________________________________________________________________________

	-->
	<!-- HEAD -->
	<DismemberablePart Name="Head" Hitpoints="25">
		<!--
				The Materials section is a list of materials in the original mesh that are to be turned off
				when the part is dismembered
		-->
		<!--
		<Materials>
		<Material Name="headSG"/>  
		</Materials>
	-->
		<!--
				 ReactionProcessing defines the chunks and particles to be spawned when a reaction dismemberment is processed
				 for the character the definition requires a Bone from which a chunk should be spawned and the name of the
				 chunkmesh. The ChunkMesh definition in turn can have several values set such as GravityScale and UseGinFile.
				 GravityScale greater than 1.0 pulls a chunk down faster, UseGinFile will look for a bounding box with the
				 same name as the chunkmesh in the damage mesh's gin file, if the bound is found, it is used instead
				 of the default rendering bound which can help artists orientate chunks so that they land on their
				 correct side
		-->
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="neck_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<!--			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="neck_g">
					<Param Name="ChunkMesh" Value="head"/>
					<Param Name="GravityScale" Value="1.4"/>
					<Param Name="RandomVelocityScale" Value="0.2"/>
				</Param> 
			</Chunk>
-->
		</ReactionProcessing>
		<!--
				The Capsules section provides a list of capsules that should affect the hitpoint of the part and should
				be disabled once the chunk has been dismembered
		-->
		<Capsules>
			<Capsule Name="Dneck_g"/>
		</Capsules>
	</DismemberablePart>
	<!-- LEFT SHOULDER -->
	<DismemberablePart Name="Left Shoulder" Hitpoints="25">
		<Materials>
			<Material Name="Shoulder_LSG"/>
		</Materials>
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="shoulder_L_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="shoulder_L_g">
					<Param Name="ChunkMesh" Value="Shoulder_L"/>
					<Param Name="GravityScale" Value="1.8"/>
					<Param Name="RandomVelocityScale" Value="0.1"/>
				</Param>
			</Chunk>
		</ReactionProcessing>
		<Capsules>
			<Capsule Name="Dshoulder_L_g"/>
		</Capsules>
	</DismemberablePart>
	<!-- RIGHT ELBOW -->
	<DismemberablePart Name="Right Shoulder" Hitpoints="25">
		<Materials>
			<Material Name="Elbow_RSG"/>
		</Materials>
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="shoulder_R_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="shoulder_R_g">
					<Param Name="ChunkMesh" Value="Elbow_R"/>
					<Param Name="GravityScale" Value="1.8"/>
					<Param Name="RandomVelocityScale" Value="0.1"/>
				</Param>
			</Chunk>
		</ReactionProcessing>
		<Capsules>
			<Capsule Name="Dshoulder_R_g"/>
		</Capsules>
	</DismemberablePart>
</DismembermentDefinition>

 

Edited by shak-otay
  • Like 1
Kitsuneshkaa Apprentice

Kitsuneshkaa

Posted
  • Author
Posted (edited)
5 hours ago, shak-otay said:

In the ..var01.st2 csv data is contained:

edit: and xml data: 

	<!--
		______________________________________________________________________________
		Copyright 2004 The Collective, Inc.

		DISMEMBERMENT DEFINITION

		Character: Clone Trooper
		Author: Baback Elmieh
		Date: 01/07/2004
		______________________________________________________________________________

	-->
	<!-- HEAD -->
	<DismemberablePart Name="Head" Hitpoints="25">
		<!--
				The Materials section is a list of materials in the original mesh that are to be turned off
				when the part is dismembered
		-->
		<!--
		<Materials>
		<Material Name="headSG"/>  
		</Materials>
	-->
		<!--
				 ReactionProcessing defines the chunks and particles to be spawned when a reaction dismemberment is processed
				 for the character the definition requires a Bone from which a chunk should be spawned and the name of the
				 chunkmesh. The ChunkMesh definition in turn can have several values set such as GravityScale and UseGinFile.
				 GravityScale greater than 1.0 pulls a chunk down faster, UseGinFile will look for a bounding box with the
				 same name as the chunkmesh in the damage mesh's gin file, if the bound is found, it is used instead
				 of the default rendering bound which can help artists orientate chunks so that they land on their
				 correct side
		-->
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="neck_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<!--			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="neck_g">
					<Param Name="ChunkMesh" Value="head"/>
					<Param Name="GravityScale" Value="1.4"/>
					<Param Name="RandomVelocityScale" Value="0.2"/>
				</Param> 
			</Chunk>
-->
		</ReactionProcessing>
		<!--
				The Capsules section provides a list of capsules that should affect the hitpoint of the part and should
				be disabled once the chunk has been dismembered
		-->
		<Capsules>
			<Capsule Name="Dneck_g"/>
		</Capsules>
	</DismemberablePart>
	<!-- LEFT SHOULDER -->
	<DismemberablePart Name="Left Shoulder" Hitpoints="25">
		<Materials>
			<Material Name="Shoulder_LSG"/>
		</Materials>
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="shoulder_L_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="shoulder_L_g">
					<Param Name="ChunkMesh" Value="Shoulder_L"/>
					<Param Name="GravityScale" Value="1.8"/>
					<Param Name="RandomVelocityScale" Value="0.1"/>
				</Param>
			</Chunk>
		</ReactionProcessing>
		<Capsules>
			<Capsule Name="Dshoulder_L_g"/>
		</Capsules>
	</DismemberablePart>
	<!-- RIGHT ELBOW -->
	<DismemberablePart Name="Right Shoulder" Hitpoints="25">
		<Materials>
			<Material Name="Elbow_RSG"/>
		</Materials>
		<ReactionProcessing>
			<!-- particles -->
			<Particles>
				<!-- spark particle from the joint -->
				<Param Name="BoneEmission" Value="shoulder_R_g">
					<Param Name="ParticleID" Value="IDS_FX_LIGHTSABER_BODY_IMPACT"/>
				</Param>
			</Particles>
			<!-- chunks -->
			<Chunk Typename="TSingleChunk">
				<Param Name="Bone" Value="shoulder_R_g">
					<Param Name="ChunkMesh" Value="Elbow_R"/>
					<Param Name="GravityScale" Value="1.8"/>
					<Param Name="RandomVelocityScale" Value="0.1"/>
				</Param>
			</Chunk>
		</ReactionProcessing>
		<Capsules>
			<Capsule Name="Dshoulder_R_g"/>
		</Capsules>
	</DismemberablePart>
</DismembermentDefinition>

 

ok, var is info file.

other files?

Desktop.zip

Edited by Kitsuneshkaa
  • Engineers
shak-otay Mentor

shak-otay

Posted
  • Engineers
Posted

I don't see something obvious. Also the files are too small to contain meshes, imho.

(Maybe use a PS2 debugger/emulator for getting some decent infos?)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

ResHax.com: Empowering Curious Minds in the World of Reverse Engineering

Delving into the Art of Code Unraveling: ResHax.com - Your Gateway to the Thrilling World of Reverse Engineering, Where Curiosity Meets Innovation!

Useful links

Some useful shortcuts for important informations.

×
×
  • Create New...